PCE-M118-GL PCI Express 8-Axis Motionnet Master Card Released

PCI Express 8-Axis 1 Motionnet Master Card PCE-M118-GL

 

Features

  • On-board 8-axis motion control with max. 6.5MHz pulse output
  • Linear, circular, helix and continuous interpolation
  • 1 Motionnet master 
  • High speed position latch function
  • Manual pulse generator input interface
  • Programmable acceleration and deceleration time
  • Programmable pulse output and interrupt
  • Position compare and trigger output
  • Compare output FIFO x 4
     

Specification

  • 8-Axis Motion Control 
  • Pulse output mode: ±OUT/DIR, ±CW/CCW, A/B Phase 
  • Pulse output rate: Max. 6.5Mpps / Min. 0.05pps 
  • Position range: 32 bits(±2,147,483,648 pulses) 
  • Home return mode: 13 types 
  • Velocity profiles: T-curve, S-curve 
  • Interpolation mode: linear, circular, helix and continuous 
  • Counter for encoder feedback signals: 32 bits up/down x 8 
  • Position latch input: LTC x 8 
  • Position compare output: CMP x 8, with programmable pulse width 
  • Compare trigger output rate: Max. 100Kbps 
  • FIFO buffer for compare trigger positions: 4 axes 1024(default), 2048(optional) points for each axis. 
  • Incremental encoder input: ±EA x 8, ±EB x 8 
  • Encoder index signal input: ±EZ x 8 
  • Machine interface: PEL x 8, MEL x 8, ORG x 8, SLD x 8 
  • Servo driver interface: ALM x 8, RDY x 8, SVON x 8, INP x 8, ERC x 8 
  • Simultaneous start/stop motion input: STA, STP 
  • I/O pin type: optically isolated with 2.5KVrms on all mini SCSI 100 pins x 2 
  • Manual pulse generator: isolated
  • Number of Ring: 1 
  • Serial interface: half duplex RS-485 with transformer isolation 
  • Cable type: CAT5 UTP/STP Ethernet cable 
  • Surge protection: 10KV 
  • Transmission speed: 2.5Mbps ,5Mbps, 10Mbps and 20Mbps 
  • Data flow control : automatic 
  • Communication distance: Max. 100m (20Mbps/32 slave module) 
  • Slave module function: digital I/O slave module