{"id":13247,"date":"2023-03-09T15:39:09","date_gmt":"2023-03-09T07:39:09","guid":{"rendered":"https:\/\/www.tpm-pac.com\/?post_type=faq&p=13247"},"modified":"2023-10-17T17:05:39","modified_gmt":"2023-10-17T09:05:39","slug":"reasons-for-and-solutions-to-motionnet-master-card-and-slave-communication-failure","status":"publish","type":"faq","link":"https:\/\/www.tpm-pac.com\/jp\/blog\/faq\/reasons-for-and-solutions-to-motionnet-master-card-and-slave-communication-failure\/","title":{"rendered":"Motionnet\u30de\u30b9\u30bf\u30fc\u30ab\u30fc\u30c9\u3068\u30b9\u30ec\u30fc\u30d6\u306e\u901a\u4fe1\u969c\u5bb3\u306e\u7406\u7531\u3068\u89e3\u6c7a\u7b56\uff1f"},"content":{"rendered":"
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\n\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t

Motionnet\u30de\u30b9\u30bf\u30fc\u30ab\u30fc\u30c9\u3068\u30b9\u30ec\u30fc\u30d6\u306e\u901a\u4fe1\u969c\u5bb3\u306e\u7406\u7531\u3068\u89e3\u6c7a\u7b56\uff1f<\/h2>\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
  • Verify if the power and communication indicator lights on the modules are lit up correctly<\/li>
  • The Baud Rate settings between the master and slave stations are inconsistent. Please ensure that the Baud Rate settings are consistent<\/li>
  • In each Ring, the last slave station’s TR (Termination Resistor) switch should be set to ON. Please confirm that the TR is correctly activated<\/li>
  • In the case of multiple slave stations, each module must have a unique ID. Please check if there are any duplicate slave station IDs<\/li>
  • The modules or communication cables may be damaged. Please inspect the modules or examine the communication cables one by one<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t
    • Please verify that the Baud Rate settings between the master card and the slave stations are consistent.(BR=2.5M\/5M\/10M\/20M)<\/li>
    • In the case of the master card, configure the software instructions as follows:

      \u00a0_l122_dsf_set_ring_config (U16 SwitchCardNo, U16 RingOfCard, U8 BaudRate)<\/p><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

      \n\t\t\t\t\t\t
      \n\t\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t
      • For slave modules, please verify the SW (B0 and B1) settings:<\/li><\/ul>

        For the 102 series<\/strong>, the setting location is SW1 (B0 and B1)
        For the 106-M304 series<\/strong>, the setting location is SW2 (B0 and B1)
        For the 106-D4xx series<\/strong>, the setting location is SW301 (B0 and B1)
        For the 106-D5xx\/107-D1xx\/EZM-D1xx series<\/strong>, the setting location is SW2 (B0 and B1)
        For the 106-A180A<\/strong>, the setting location is SW2 (B0 and B1)
        For the 107-D5xx\/EZM-D5xx series<\/strong>, the setting location is SW201 (B0 and B1)
        For the 107-M2A2-GEN<\/strong>, the setting location is SW2 (B0 and B1)
        For the 108-A204\/108-A222\/108-A322\/108-C144 series<\/strong>, the setting location is SW1 (B0 and B1)
        For the STP-M11x(A)\/STP-M51x(A)\/SVR-M11x series<\/strong>, the setting location is Dip-SW (B0 and B1)<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

        \n\t\t\t\t\t\t
        \n\t\t\t\t\t
        \n\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t\t\t\t
        \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t\t
        \n\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t
        • Please ensure that the last station in each ring, connected to the master card, has its TR (Terminal Resistor) set to ON<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t\t\t\t
          \n\t\t\t
          <\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          The TR (Terminal Resistor) of the last module must be set to ‘ON’<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          The TR (Terminal Resistor) of the last module must be set to ‘ON’<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

          \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Motionnet\u4e3b\u5361\u8207\u5f9e\u7ad9\u7121\u6cd5\u901a\u8a0a\u65f3\u539f\u56e0_\u8acb\u78ba\u8a8d\u4e3b\u5361\u9023\u63a5\u6bcf\u500bRing\u7684\u6700\u5f8c\u4e00\u9846\u5f9e\u7ad9TR\u9700\u5207\u63db\u81f3ON\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t\t\t\t
          \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t
          • All modules must have unique IDs. Please check the station ID (Default: 0; Set SW: A0~A5)<\/li><\/ul>

            102 Series<\/strong>: Setting location is SW1 (A0~A5)
            106-M304 Series<\/strong>: Setting location is SW1 (A0~A5)
            106-D4xx Series<\/strong>: Setting location is SW301 (A0~A5)
            106-D5xx Series<\/strong>: Setting location is SW2 (A0~A5)
            107-D1xx\/EZM-D1xx Series<\/strong>: Setting location is SW2 (A0~A5)
            106-A180A<\/strong>: Setting location is SW1 (A0~A5)
            107-D5xx\/EZM-D5xx Series<\/strong>: Setting location is SW201 (A0~A5)
            107-M2A2-GEN<\/strong>: Setting location is SW1 (A1~A5)
            108-A204\/108-A222\/108-A322\/108-C144 Series<\/strong>: Setting location is SW1 (A0~A5)
            STP-M111(A)<\/strong>: Setting location is Dip-SW (A4) + RS1 (0~15)
            STP-M11x(A)\/STP-M51x(A)\/SVR-M11x Series<\/strong>: Setting location is Dip-SW (A0~A4)<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

            \n\t\t\t\t\t\t
            \n\t\t\t\t\t
            \n\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t\t\t\t
            \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t\t
            \n\t\t\t
            \n\t\t\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
            \n\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t\t\t\t
            \n\t\t\t
            <\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            • Each module must have a unique ID. Please verify the station ID (ensure Dip Switch settings A0~A5)<\/li>
            • Module IDs on the same communication ring must not be duplicated<\/li>
            • Module IDs can be set with skipped numbers<\/li>
            • Module IDs can be arranged in any order<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
              \n\t\t\t
              \n\t\t\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Motionnet\u4e3b\u5361\u8207\u5f9e\u7ad9\u7121\u6cd5\u901a\u8a0a\u65f3\u539f\u56e0_\u6240\u6709\u6a21\u7d44\u90fd\u9700\u7368\u7acbID,\u8acb\u6aa2\u67e5\u5f9e\u7ad9ID(\u8acb\u78ba\u8a8dDip\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
              \n\t\t\t
              \n\t\t\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
              \n\t\t\t\t\t\t
              \n\t\t\t\t\t
              \n\t\t\t
              \n\t\t\t\t\t\t
              \n\t\t\t\t\t\t\t
              \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
              \n\t\t\t\t\t\t
              \n\t\t\t\t\t
              \n\t\t\t
              \n\t\t\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
              \n\t\t\t
              \n\t\t\t\t\t\t
              \n\t\t\t\t\t\t\t
              \n\t\t\t
              <\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t
              • Module or communication cable damage. Please check the modules or inspect the communication cables one by one<\/li>
              • Check if a single module is damaged<\/li>
              • Verify the integrity of the communication cables between the modules<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
                \n\t\t\t
                \n\t\t\t\t\t\t
                \n\t\t\t\t\t\t\t\t\t

                \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 Please check the cable from the master station to the modules<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

                \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Motionnet\u4e3b\u5361\u8207\u5f9e\u7ad9\u7121\u6cd5\u901a\u8a0a\u65f3\u539f\u56e0_\u6a21\u7d44\u6216\u901a\u8a0a\u7dda\u6750\u640d\u58de.\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
                \n\t\t\t
                \n\t\t\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>","protected":false},"featured_media":0,"template":"","motionnet":[],"class_list":["post-13247","faq","type-faq","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.tpm-pac.com\/jp\/wp-json\/wp\/v2\/faq\/13247","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.tpm-pac.com\/jp\/wp-json\/wp\/v2\/faq"}],"about":[{"href":"https:\/\/www.tpm-pac.com\/jp\/wp-json\/wp\/v2\/types\/faq"}],"version-history":[{"count":0,"href":"https:\/\/www.tpm-pac.com\/jp\/wp-json\/wp\/v2\/faq\/13247\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.tpm-pac.com\/jp\/wp-json\/wp\/v2\/media?parent=13247"}],"wp:term":[{"taxonomy":"motionnet","embeddable":true,"href":"https:\/\/www.tpm-pac.com\/jp\/wp-json\/wp\/v2\/motionnet?post=13247"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}