EZC-D302-XN(Available Soon)(16-CH.DO)

特徴

● 16-Ch. DO slave module with NPN type

● TPM EtherCAT® add-on module

● Local bus support with CAN

● Unpluggable terminal block

● DIN rail mounting (L-97 x W-100 x H-12 mm)

説明

The EZC-D302-XN is a 16-channel Digital Output slave module of TPM EtherCAT® Add-on modules with NPN type. EZC-D302-XN can support local CAN bus through CAN Coupler, EZC-N100. With EtherCAT® control, it will lead to fast ethernet and full-duplex serial interface. The transmission speed is up to 100 Mbps. EZC Add-on moduels can provide high-speed, high-accuracy and low-cost remote I/O for EtherCAT®.

イーサキャット®
シリアル・インターフェース高速イーサネット、全二重
分散クロック1ms
サージ保護10KV
伝送速度100 Mbps
I/O isolation voltage3750 Vrms
出力タイプNPN open collector Darlington transistors
Switch capacityEach output Ch. is 100mA at 24VDC
Response timeOn to Off, about 50µs ;

Off to On, about 10µs

Over current protection1A (Max) for each port (8-Ch.)
 
一般
電源入力24VDC±10%
消費電力2W typical
使用温度0~60

リソース

ご注文について

  • 207-C244C

    4-Ch. Encoder slave module w. 4 LTC / 4 CMP

  • SCB-1BB-06A / 10A / 20A / 30A / 50A / A0A

    CAT5 LAN cable, 0.6M / 1M / 2M / 3M / 5M / 10M

閉じる
閉じる