207-D204-XPS

特徴

● 32-Ch. DO slave module with pluggable terminal

最大転送速度最大100Mbpsの転送速度

● Easy installation with RJ45 phone jack and LED diagnostic

● Pluggable terminal block with spring plug connectors

アドレス設定用ディップスイッチ

● DIN rail mounting (L-122 x W-66 x H-104 mm)

説明

The 207-D204-XPS is a 32-channel Digital output slave module with pluggable terminal. With EtherCAT® control, it will lead to fast ethernet and full-duplex serial interface. The transmission speed is up to 100 Mbps. The digital slave can connect different slaves serially with cable CAT5 UTP/STP ethernet cable.Remote IO

イーサキャット®
シリアル・インターフェース 高速イーサネット、全二重
分散クロック 0.25ms
ケーブルタイプ CAT5 UTP/STP イーサネットケーブル
サージ保護 10KV
伝送速度 100 Mbps
I/O isolation voltage 3750Vrms
出力タイプ PNP : MOSFET-P;

Integral suppression on diodes for inductive loads

Switch capacity Each output Ch. is 100mA at 24VDC
Response time On to Off, about 50μs;

Off to On, about 10μs

Over current protection 1A (Max) for each port (8-Ch.)
 
一般
電源入力 24VDC±10%
消費電力 標準3W
使用温度 0~60

リソース

 

 

ご注文について

  • 207-D204-XNS

    32-Ch. Digital Output (DO) with NPN type

  • 207-D204-XPS

    32-Ch. Digital Output (DO) with PNP type

  • SCB-1BB-06A / 10A / 20A / 30A / 50A / A0A

    CAT5 LAN cable, 0.6M / 1M / 2M / 3M / 5M / 10M

こちらもおすすめ…

Close
Close