207-D222-NNS(16-CH.DI/DO)

Remote IO Features

● 16-channel Digital input and 16-channel Digital output with pluggable terminal

最大転送速度最大100Mbpsの転送速度

● Easy installation with RJ45 phone jack and LED diagnostic

● Pluggable terminal block with spring plug connectors

● DIP switch for address setting

● DIN rail mounting (L-122 x W-66 x H-104 mm)

説明

EtherCAT IO The 207-D222-NNS is a 16-channel Digital input and 16-channel Digital output slave I/O Module with pluggable terminal. With EtherCAT® control, it will lead to fast ethernet and full-duplex serial interface.Remote IO EtherCAT IO The transmission speed is up to 100 Mbps. The digital slave can connect different slaves serially with cable CAT5 UTP/STP ethernet cable.EtherCAT IO

 

イーサキャット®
シリアル・インターフェース高速イーサネット、全二重
分散クロック0.25ms
ケーブルタイプCAT5 UTP/STP イーサネットケーブル
サージ保護10KV
伝送速度100 Mbps
I/O isolation voltage3750Vrms
入力タイプNPN type
Input impedance5.6KΩ / 0.5W
Input current±5mA(Max)
出力タイプNPN : open collector Darlington;

Integral suppression on diodes for inductive loads

Switch capacityEach output Ch. is 100mA at 24VDC
Response timeOn to Off, about 50μs;

Off to On, about 10μs

Over current protection1A (Max) for each port (8-Ch.)

 

一般
電源入力24VDC±10%
消費電力標準3W
使用温度0~60

リソース

ご注文について

  • 207-D222-NNS

    16-Ch. Digital Input (DI) and 16-Ch. Digital Output (DO) with NPN type

  • 207-D222-PPS

    16-Ch. Digital Input (DI) and 16-Ch. Digital Output (DO) with PNP type

  • SCB-1BB-06A / 10A / 20A / 30A / 50A / A0A

    CAT5 LAN cable, 0.6M / 1M / 2M / 3M / 5M / 10M

こちらもおすすめ…

閉じる
閉じる