207-D402H-XNS(16-CH.DO)

特徴

● 16-Ch. DO slave module with pluggable terminal

最大転送速度最大100Mbpsの転送速度

● Easy installation with RJ45 phone jack and LED diagnostic

● Pluggable terminal block with spring plug connectors

アドレス設定用ディップスイッチ

● DIN rail mounting (L-122 x W-66 x H-104 mm)

説明

EtherCAT IO The 207-D402-XNS / XPS is a 16-channel Digital output slave I/O Module with pluggable terminal. With EtherCAT® control, it will lead to fast ethernet and full-duplex serial interface. The Remote IO transmission speed is up to 100 Mbps.EtherCAT IO The digital slave can connect different slaves serially with EtherCAT IO cable CAT5 UTP/STP ethernet cable.

スペック

 

イーサキャット®
シリアル・インターフェース高速イーサネット、全二重
分散クロック0.25ms
ケーブルタイプCAT5 UTP/STP イーサネットケーブル
サージ保護10KV
伝送速度100Mbps
I/O isolation voltage3750Vrms
出力タイプNPN : open drain MOSFET;

Integral suppression on diodes for inductive loads

Switch capacityEach output Ch. is 500mA at 24VDC
Response timeOn to Off, about 50µs;

Off to On, about 10µs

Over current protection4A (max) for each port (8-Ch.)

 

一般
電源入力24VDC±10%
消費電力標準3W
使用温度0~60

 

リソース

ご注文について

  • 207-D402H-XNS
    16-Ch. Digital output (DO) with NPN type
  • 207-D402H-XPS
    16-Ch. Digital output (DO) with PNP type
  • SCB-1BB-06A / 10A / 20A / 30A / 50A / A0A
    CAT5 LAN cable, 0.6M / 1M / 2M / 3M / 5M / 10M

こちらもおすすめ…

閉じる
閉じる