207-D411H-PPS

特徴

● 16-Ch. DO slave module with pluggable terminal

最大転送速度最大100Mbpsの転送速度

● Easy installation with RJ45 phone jack and LED diagnostic

● Pluggable terminal block with spring plug connectors

アドレス設定用ディップスイッチ

● DIN rail mounting (L-122 x W-66 x H-104 mm)

説明

EtherCAT IO The 207-D411H-NNS / PPS is an 8-channel Digital Input and 8-channel Digital output slave I/O Module with the pluggable terminal. With EtherCAT® control, EtherCAT IO will lead to fast ethernet and full-duplex serial interface. The transmission speed is up to 100 Mbps. The digital slave can connect different slaves serially with cable CAT5 UTP/STP ethernet cable. Remote IO.EtherCAT IO

イーサキャット®
シリアル・インターフェース 高速イーサネット、全二重
分散クロック 0.25ms
ケーブルタイプ CAT5 UTP/STP イーサネットケーブル
サージ保護 10KV
伝送速度 100Mbps
I/O isolation voltage 3750Vrms
入力タイプ PNP type
Input impedance 5.6KΩ / 0.5W
Input current ±5mA(Max)
出力タイプ PNP : MOSFET-P;

Integral suppression on diodes for inductive loads

Switch capacity Each output Ch. is 500mA at 24VDC
Response time On to Off, about 50µs;

Off to On, about 10µs

Over current protection 4A (max) for each port (8-Ch.)
 
一般
電源入力 24VDC±10%
消費電力 標準3W
使用温度 0~60

リソース

Ordering information

  • 207-D411H-NNS

    8-Ch. DI and 8-Ch. DO with NPN type

  • 207-D411H-PPS

    8-Ch. DI and 8-Ch. DO with PNP type

  • SCB-1BB-06A / 10A / 20A / 30A / 50A / A0A

    CAT5 LAN cable, 0.6M / 1M / 2M / 3M / 5M / 10M

こちらもおすすめ…

Close
Close