207-M3A2-GEN 2チャンネルパルストレイン変換器

特徴

● EtherCAT 2-axis pulse train output module

● Distributed Clock 0.5 / 1 / 2 / 4 ms

● CiA402 device profile support CSP, PP, Home

● Pulse output mode support OUT/DIR, CW/CCW and 4xA/B Phase

● Pulse output mode frequency Max. 6.5MHz

● Encoder input frequency Max. 6.5MHz

● 2-ch Trigger output frequency Max. 100KHz

 

説明

スペック

 

イーサキャット
データ転送媒体 Ethernet 100BASE-TX, CAT5 Shielded Ethernet cable
通信タイプ DC
分散クロック 0.5/1/2/4 ms
IDスイッチ 8ビット
CiA402デバイス・プロファイル CSP、PP、ホーム

 

モーション
Number of Axis 2
Pulse Output Mode OUT/DIR,CW/CCW and 4xA/B Phase, Max. 6.5MHz
Encoder Input OUT/DIR,CW/CCW and 4xA/B Phase, Max. 6.5MHz
Encoder Index Z-Index
Motion I/O PEL, MEL, ORG, EMG
Servo I/O ALM, RDY, SVON, RST, INP, ERC
トリガー出力信号 2-CH, Fixed Interval, Max. 100KHz
ホーミング・モード ORG, EZ, Limit
LED Indicator PWR, RUN, ERR, PEL, MEL, ORG, EMG, ALM

 

一般
電源入力 24VDC±10%
消費電力 5W typical
使用温度 0°C~50°C (32°F~122°F) ambient temperature with air flow
保存温度 -20°C~80°C (-4°F~176°F)
湿度 85% (non-condensing @60°C)
サイズ L122 x W83 x H104 mm

 

Introduction

The 207-M3A2-GEN is an EtherCAT SubDevice module boasts a high-speed position comparison trigger and encoder re-drive capability, facilitating machine and equipment builders in employing multiple triggers concurrently for tasks such as AOI, glue dispensing, display testing, and many more. Furthermore, the 207-M3A2-GEN offers 2-axis motion control with a bridge function bridging EtherCAT and non-EtherCAT systems. Its advanced motion control features empower machine and equipment builders to diversify their motor selection, encompassing linear, step, servo, and AC motors, rendering it well-suited for various automation industry applications.

リソース

Close
Close