Description
The 207-D411H-NNS / PPS EtherCAT IO is an 8-channel Digital Input and 8-channel Digital output slave I/O Module with the pluggable terminal. With EtherCAT® control, it will lead to fast ethernet and full-duplex serial interface.EtherCAT IO The Remote IO transmission speed is up to 100 Mbps.EtherCAT IO The digital slave can connect different slaves serially with cable CAT5 UTP/STP ethernet cable.
| EtherCAT® | |
|---|---|
| Serial interface | Fast Ethernet, Full-Duplex |
| Distributed clock | 0.25ms |
| Cable type | CAT5 UTP / STP Ethernet cable |
| Surge protection | 10KV |
| Transmission speed | 100Mbps |
| I/O isolation voltage | 3750Vrms |
| Input type | NPN type |
| Input impedance | 5.6KΩ / 0.5W |
| Input current | ±5mA(Max) |
| Output type | NPN : open drain MOSFET; Integral suppression on diodes for inductive loads |
| Switch capacity | Each output Ch. is 500mA at 24VDC |
| Response time | On to Off, about 50µs; Off to On, about 10µs |
| Over current protection | 4A (max) for each port (8-Ch.) |
| General | |
|---|---|
| Power input | 24VDC±10% |
| Power consumption | 3W typical |
| Working temperature | 0 to 60℃ |
