Description
The EZC-D102-XP is a 16-channel Digital Output slave module of TPM EtherCAT® Add-on modules with PNP type. EZC-D102-XP can support local CAN bus through CAN Coupler, EZC-N100. With EtherCAT® control, it will lead to fast ethernet and full-duplex serial interface. The transmission speed is up to 100 Mbps. EZC Add-on moduels can provide high-speed, high-accuracy and low-cost remote I/O for EtherCAT®.I/O Module
| EtherCAT® | |
|---|---|
| Serial interface | Fast Ethernet, Full-Duplex |
| Distributed clock | 1ms |
| Surge protection | 10 KV |
| Transmission speed | 100 Mbps |
| I/O isolation voltage | 3750 Vrms |
| Output type | PNP : MOSFET-P |
| Switch capacity | Each output Ch. is 100mA at 24VDC |
| Response time | On to Off, about 50µs ;
Off to On, about 10µs |
| Over current protection | 1A (Max) for each port (8-Ch.) |
| General | |
|---|---|
| Power input | 24VDC±10% |
| Power consumption | 2W typical |
| Working temperature | 0 to 60℃ |
