207-ADIO-KIT

特徴

● 8DI / 8DO / 8AI / 2AO ADIO module

最大転送速度最大100Mbpsの転送速度

LED診断

アドレス設定用ディップスイッチ

PCB実装のカスタマイズ(L-98×W-26×H-77mm)

説明

I/O Module The 207-ADIO-KIT is an 8-channel Analog Input (AI), 2-channel Analog Output (AO), 8-channel Digital Input (DI) and 8-channel Digital Output (DO) slave module with the pluggable terminal block. With EtherCAT® control, it will lead to fast ethernet and full-duplex serial interface. The transmission speed is up to 100 Mbps. The digital slave can connect different slaves serially with cable CAT5 UTP/STP ethernet cable. 207-ADIO-KIT also supports TwinCAT with ESI File, and Object Dictionary (OD) of PDO and SDO.

207-ADIO-KIT has passed RSI-ECAT Certificate.

イーサキャット®
シリアル・インターフェース高速イーサネット、全二重
分散クロック1ms
ケーブルタイプCAT5 UTP/STP イーサネットケーブル
サージ保護10KV
伝送速度100 Mbps
I/O isolation voltage3750 Vrms
 
AD Converter
Effective resolution16 bits
Conversion time~ 125µs
Input rangeSingle End : ±10/±5/±2.5/±1.25V;

Differential : ±10/±5/±2.5/±1.25V

Input current0~20mA
Number of inputs8-channel AI
 
DA Converter
Effective resolution12 bits
Output range±10V
Operation modeRamp and Noise, Single Value, Single Coupled Value, Pattern
Number of outputs2-channel AO
 
DI/O Control
Input typesNPN
Input impedance5.6KΩ / 0.5W
Input current±5mA(Max)
出力タイプNPN open collector Darlington transistors
Switch capacityEach output Ch. is 100mA at 24VDC
Response timeOn to Off, about 50μs;

Off to On, about 10μs

Over current protection1A (Max.) for each port (8-Ch.)
 
一般
電源入力24VDC±10%
消費電力標準3W
使用温度0~60

 

リソース

ご注文について

  • 207-ADIO-KIT

    8-Ch. AI / 2-Ch. AO / 8-Ch. DI / 8-Ch. DO slave module with Switch / LED / Meter on-board

  • SCB-1BB-06A / 10A / 20A / 30A / 50A / A0A

    CAT5 LAN cable, 0.6M / 1M / 2M / 3M / 5M / 10M

閉じる
閉じる