Description
207-D533-PPS
48-Ch. DI and 48-Ch. DO with PNP type
EtherCAT Module Features● 48-Ch. DI and 48-Ch. DO with PNP type● Max. 100Mbps transfer rate●EtherCAT IO Easy installation with RJ45 phone jack and LED diagnostic● Pluggable terminal block with spring plug connectors● Remote IO DIP switch for address setting● DIN rail mounting (L-122 x W-127 x H-104 mm)I/O Module.EtherCAT IO
| EtherCAT® | |
|---|---|
| Serial interface | Fast Ethernet, Full-Duplex |
| Distributed clock | 0.25ms |
| Cable type | CAT5 UTP / STP Ethernet cable |
| Surge protection | 10KV |
| Transmission speed | 100 Mbps |
| I/O isolation voltage | 3750Vrms |
| Input type | PNP type |
| Input impedance | 5.6KΩ / 0.5W |
| Input current | ±5mA(Max) |
| Output type | PNP : MOSFET-P; Integral suppression on diodes for inductive loads |
| Switch capacity | Each output Ch. is 100mA at 24VDC |
| Response time | On to Off, about 50μs ; Off to On, about 10μs |
| Over current protection | 1A (Max) for each port (8-Ch.) |
| General | |
|---|---|
| Power input | 24VDC±10% |
| Power consumption | 6W typical |
| Working temperature | 0 to 60℃ |
