102-M1C1-GEN(1 axis)

Features

● 1-axis Motion Controller Motionnet^® slave modules wo. encoder

● Max. 20Mbps transfer rate

● Max. 6.5MHz, 1-axis pulse output rate

● Programmable acceleration and deceleration time

● T-curve and S-curve velocity profiles support

● Change speed / position on-the-fly

● General purpose isolated I/O : 2 DI and 2 DO

● Easy installation with RJ45 phone jack and LED diagnostic

● DIN rail mounting (L-77 x W-69 x H-38 mm)

Description

102-M1C1-GEN is a 1-axis Motion Controller Motionnet^® slave module without encoder. It is suitable for general purpose Servo/Stepping Motor Drives.

Motionnet^®
Communication controller	Motionnet^® slave motion controller ASIC
Serial interface	Half duplex RS-485 with transformer isolation
Cable type	CAT5 UTP / STP Ethernet cable
Surge protection	10 KV
Transmission speed	2.5Mbps, 5Mbps, 10Mbps and 20Mbps


Motion
Programmable pulse output mode	OUT / DIR, CW / CCW, A / B phase
Programmable pulse command speed	Max. 6.5Mpps
Home return mode	13 types
Velocity profile	T-curve and S-curve
Machine interface	PEL, MEL and ORG
Servo drive interface	ALM, SVON
LED indicator	PWR, RUN, ERR, PEL, MEL, ORG, EMG, SVON and ALM
Isolated digital I/O	2 DI / 2 DO

Resources

1-axis motion slave module for General purpose wo.encoder

CAT5 LAN cable, 0.6M / 1M / 2M / 3M / 5M / 10M