Configuration of ETH-L132-D1 with Host PC
Explanation of ETH-L132-D1 Features:
- Ethernet-Based Motionnet Controller
- No software installation required; simply assign an IP address
- Offers timed I/O and motion control applications
– I/O slave stations; Max 16
– 1-Axis slave stations; Max 16 - High scalability
- Ideal for use with small industrial PCs in space-constrained environments
Domain Configuration:
- ETH-L132-D1
– Default IP: 192.168.0.10
– Configuration and IP Modification Using Ethtool
– After installing the tool, locate it in the root directory: C:\TPM\Bin
– After the connection, access the “IP Setting” option
- HostPC
– Open Ethernet Network Settings
– Internet Protocol Version 4 (TCP/IPv4)
– Set IP Address: 192.168.0.xxx (Ensure it’s different from ETH-L132D1’s IP)
– Subnet Mask: 255.255.255.0
MyLink Verification:
- To start MyLink
– Check “Assign PAC/ETH”
– Choose the regional connection
– Check “Connect to IP Address” (192.168.0.10)
– Click “Scan”
– If the settings are correct, ETH-L132D1 will appear in the master station area
– Check the main station ETH-L132D1
– Click “OK” to access the MyLink operation page
