Description
STP-M512A
Motionnet® 5-phase micro-step Drive
Features
- STP-M512A : Current 2.8A
- Constant-current Driving System
- Adjustable running current and stop current
- Support Multiple Resolution (1 ~ 125,000)
- Support 0.36° and 0.72°step angle
- Support Encoder feedback
- Low Vibration and Noise
- DIP switch for address setting
- Dimensions : L-75 x W-140 x H-30 mm
| Motionnet® | |
|---|---|
| Communication controller | Motionnet® slave motion controller ASIC |
| Serial interface | RS-485 with transformer isolation |
| Cable type | CAT5 UTP / STP Ethernet cable |
| Surge protection | 10KV |
| Transmission speed | 2.5Mbps, 5Mbps, 10Mbps and 20Mbps |
| Multi Axes Drive | Max. 32 sets / ring |
| I/O input signal | PEL, MEL, ORG, LTC and EMG |
| I/O output signal | CMP |
| Position control | Incremental mode / Absolute mode Data range : 28 bits |
| Homing mode | ORG, Z-phase, Limit Totally 13 types |
| Software | Motion library (DLL) for Win XP / 7 / 10 |
| Drive | |
|---|---|
| Input voltage | 24 or 48V DC |
| Drive model | 5-phase |
| Driving current | 0.5~3.0A Max/ Phase |
| Driving current setting | RUN : 0~F by rotary switch STOP : 0~F by rotary switch |
| Current consumption | 3.1W typical (130mA / 24V) no load |
| Ambient temperature | In use : 0~50 °C In Storage : -20~70 °C |
| Humidity | In use : 35~85% (Non-condensing) In Storage : 10~90% (Non-condensing) |
| Vib. reset | 0.5G |
| Micro-step | 1, 2, 5, 10, 25, 50, 125, 250, 3, 4, 6, 12,18, 24, 36, 72 by rotary switch |
| LED display | EL+, EL-, ORG, EMG, INP, ALM, SVON, PWR, RUN, ERR, Current Rate |
