EtherCAT I/O Solutions-Taiwan Pulse Motion

PCE-L122-DCO(2 Rings)

Features

● PCI Express x1 compliant
● Max. 20Mbps transfer rate
● 2 Rings of Motionnet Master
● Max. 128 Motionnet slave modules supported
● Easy installation with RJ45 phone jack and LED diagnostic
● Compare output FIFO x 2
● High Speed FIFO LATCH x 4
● General purpose isolated I/O: 4 DI and 4 DO
● Hardware IC with unique ID

Description

PCE-L122-DCO is a standard PCI Express master control card with high-speed real-time network extension called Motionnet. Motionnet is a new series of a communicating system designed for versatile automation applications. This master can connect up to 64×2=128 slave modules. There are 3 categories of the slave modules: motion control, digital I/O, and miscellaneous functions. PCE-L122-DCO also provides high-performance functions, Auto-Compare Trigger output, and FIFO Latch. motion control These features enhance more advanced applications greatly.

Specification:

 

Motionnet®
Number of ring2
Serial interfaceHalf duplex RS-485 with transformer isolation
Cable typeCAT5 UTP / STP Ethernet cable
Surge protection10 KV
Transmission speed2.5Mbps, 5Mbps, 10Mbps and 20Mbps
Data flow controlAutomatic
Communication distanceMax. 100M (20Mbps / 32 slave modules)
Communication slave module number2 Rings with Max. 128 slaves (1 Ring with 64 slaves)
Isolated digital inputIN x 4, NPN type
Isolated digital outputOUT x 4, NPN type
Unique IDHardware IC
Incremental encoder input±EA x 2, ±EB x 2
Position compare outputCMP x 2, 1,024 points / ch.
Position latch inputLTC x 4, 1,024 points / ch.

 

General
Bus type1-lane 2.5 Gb/s PCI Express
Power consumption3.3VDC at 430mA, 12VDC at 55mA typical
Working temperature0°C~60°C

 

Resources

Ordering Information

  • PCE-L122-DCO

2-Ring Motionnet®​ Master card

  • 104-T110-DUM

Extended daughter board with pluggable terminal block connectors

  • SCB-111-10A / 20A / 30A / 50A

SCSI 20 pin, 1M / 2M / 3M / 5M

FAQ

FAQ
Why is the DIO on the PCE-L12x-DCO board not functioning?
Close
Close